导航: 老古网老古论坛XMOS公共讨论区XMOS开源项目区单片机程序设计嵌入式系统广告区域
→硬件:请大家帮帮忙!多谢了!

* 18570: 硬件:请大家帮帮忙!多谢了!

   dirty 
dirty发表的帖子 

 硬件:请大家帮帮忙!多谢了!
各位请帮忙翻译一下:有关流控制原理。此外有没W90221和W89C841的中文资料。不胜感
激!
Flow Control :The flow of control passes to the next sequential instruction in 
memory unless directed otherwise by branch instructions, nullification of 
instructions, or interruptions. 
Branching
•Unconditional branch instructions 
Always branch to the specified target•Conditional branch instructions 
Perform some operation (move, compare, add, or bit test) and then branch if the 
specified condition is met
•Delayed branch feature 
The instruction following the branch is executed before     control passes 
to the branch destination.
10baseT或100baseTFaults, traps, interrupts, and checks are the different 
classes of interruptions that may happen during instruction processingAll four 
classes of interruptions are handled in the same wayThe interruptions are 
categorized into four groups based on their priorities


发表时间:2003年2月11日18:08:00

  
回复该帖

本主题共有 4 帖,分页:>>>>>该主题的所有内容[4]条

 *树形目录 只列出部分跟帖的标题以及简单的摘要信息 该主题的部分跟帖如下:

  18598.[详细]参考
摘要:流控制的管理:流控制的管理通过Memory中的一系列指令序列(来实现),如果不是已被定向的 其它方式,就可以通过分支指令,使其失效或中断。  分支: •无条件分支指令总是无条件地转......(356字)
- [Kuang-chingTsui][1208次] 2003年2月11日

  18681.[详细]太谢谢你了!!
摘要:......(无内容)
- [dirty][828次] 2003年2月13日

  18691.[详细]不必客气,有
摘要:不必客气,有错误请指正。......(12字)
- [Kuang-chingTsui][1057次] 2003年2月13日

[上一篇帖子]:硬件:如何把protel的文件生成cam350可以查看的gerbe文件?
[下一篇帖子]:关注三星的ARM芯片:S3C44B0、S3C4510B、S3C2410、S3C2500……/////